Welcome Guest Search | Active Topics | Members | Log In | Register

Zeiss Biogon Options · View
joanlvh
Posted: Saturday, July 19, 2008 1:46:45 PM
Rank: Newbie
Groups: Member

Joined: 7/19/2008
Posts: 2
Points: 6
what about this one Carl Zeiss C Biogon T* 2,8/35 ZM Lens, can it be used with a canon 40 D?

what does Biobon, Distanga ect indicate? thank you joanlvh
Sponsor
Posted: Saturday, July 19, 2008 1:46:45 PM
PebblePlace
Posted: Saturday, July 19, 2008 2:11:53 PM
Rank: Administration
Groups: Administration

Joined: 1/31/2008
Posts: 82
Points: 5
Location: Dallas, Texas
The Zeiss ZM lenses are for the Leica M8 rangefinders. Rangefinder lenses (generally speaking) are not compatible with film or digital SLRs because they extended to far into the chamber. Rangefinders do NOT have a mirror, so the rear of lens is very, very close to the film plane. This is part of the reason why rangefinders are smaller and also have less vibration (mirror vibration).
joanlvh
Posted: Saturday, July 19, 2008 4:38:03 PM
Rank: Newbie
Groups: Member

Joined: 7/19/2008
Posts: 2
Points: 6
thank you Pebble Place for you explanation. I really appreciate the db for zeiss lenses and canon cameras. I am having trouble locating the lenses to buy. Most of the usuals just have a couple or three. I am looking for the zeiss distagon 35mm f 2.8 lens. Do you have any suggestions, I too am in Dallas but of course can order from anywhere. thanks again
PebblePlace
Posted: Monday, July 21, 2008 1:15:15 AM
Rank: Administration
Groups: Administration

Joined: 1/31/2008
Posts: 82
Points: 5
Location: Dallas, Texas
Rarely do I buy a used lens from a store. Usually it's from the FM buy/sell board: http://www.fredmiranda.com/forum/board/10 Of course the other option is Ebay.

When picking a 35/2.8, ask the seller whether or not they adjusted the focus ring for infinity focus. On many lenses the rubber can be rolled back on the focus ring which exposes some screws. These screws are loosened and then the lens is adjusted until it reaches infinity focus. Obviously this is a bad thing - novices are randomly adjusting lenses out of spec so that the lens doesn't hit the mirror and/or so it reaches infinity focus on the ABC adapter - many cases a crappy adapter. Then they sell the lens and the buyer ends up with a lens that's no longer in proper calibration. This won't be so risky on a 35/2.8 because it doesn't have a floating element system, but it can't be good either.


Users browsing this topic
Guest


Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Main Forum RSS : RSS

Powered by Yet Another Forum.net version 1.9.1.2 (NET v2.0) - 9/27/2007
Copyright © 2003-2006 Yet Another Forum.net. All rights reserved.
This page was generated in 0.325 seconds.